The 05-08 GT Aggressive Chin spoiler Engineered and Manufactured by CDC, and is produced using High Pressure Injection Molded technology. This urethane piece is designed to create the ultimate performance appearance and engineered as a functional piece. The CDC Aggressive style spoiler requires slight Factory Fascia modifications to create the increased air flow to after coolers or radiator. Offering in textured black or raw. The clearance of the Aggressive spoiler measured from the floor to lowest point of the Chin Spoiler on a stock height vehicle: Aggressive = 5.75". Please note: Aggressive Chin Spoiler will not work on California Special or GT500 vehicles. 110021

$236.00

The 05-08 V6 Classic Chin Spoiler is engineered and manufactured by CDC. The V6 Chin Spoiler is made using high pressure RIM technology and urethane material. Designed to enhance the factory fascia while maintaining factory fit and finish and quality. The spoiler is available in textured black or raw. Simply install using the supplied self tapping screws and 3M Acrylic Bonding tape 110022

$236.00

The 05-06 Mustang V8 GT Chin Spoiler is Designed and Engineered by CDC, the GT Chin Spoiler highlights the natural lines of the factory fascia resulting in a stronger performance stance of the GT . CDC uses High Pressure Reaction Molded technology on this urethane part to ensure quality fit and finish. Available in textured black or raw. Simply attach using supplied hardware and 3M Acrylic Bonding Tape. 110020

$236.00

Heritage styling combined with today's technology and engineering resulted in the creation of this OE quality ingrained Classic Deck Lid Trim Panel. This ABS panel finishes out the style of the rear end requires no drilling, NO paint and eliminates the FAKE gas cap
110904 Decklid trim with no logo 
110903 Decklid trim with GT logo

$158.00
No Logo

$173.00
GT Logo

Flag Horse available for 05-08 Mustangs. Take the original equipment running horse to the next level. Remove the factory horse and replace. 110200

$47.00

Tri-Pony Emblem for the grille Fits 2005-07 Mounts on CDC Billet Replacement Grille. 0511-3000-01

$37.00

CDC all new Classic Light Bar to fit the all new 2005-08 Mustang Convertible. They have kept the high quality, attention to fit and finish and have also simplified the installation process. The light bar has been engineered to fit the curves and natural lines of the vehicle to provide a factory fit. The high mounted LED light provides added safety with a highly visible brake light. If rain should attempt to spoil your cruise no fear, the factory top effortlessly fits over the light bar and the Classic Light Bar does not interfere with any original factory functions. The light bar is constructed of a sturdy 1 ¼” round steel tube, with a 1/8” wall thickness. This polyurethane piece is wrapped in vinyl, grained to match your car's interior trim. The bar is supplied with brackets that are mounted to the B pillars and they receive the Light Bar a sturdy mount and also stiffens the body. With in a couple hours your Mustang will be ready for the next convertible day. 3 year 36,000 mile warranty ***Not intended rollover protection***“Revised wiring automatically disables the light when the convertible top is closed, no external cut-off switch needed.” 11000 Black
110001 Dove Gray -  110002 Camel - 110003 Crimson - 110005 Carbon Fiber

$429.00 Black

$449.00 Dove

$449.00 Camel

$449.00 Crimson

$479.00 Carbon

The Ducktail Spoiler is Designed and Engineered by CDC. This blow molded ABS spoiler is a three piece spoiler, which is lightweight and requires no trunk strut adjustments. The 05-08 Mustang Duck Tail Spoiler will hard mount to the vehicle via Bolts and/or Acrylic Bonding Tape to increase durability and long term proper fitment. The spoiler is available with or without pony logo (an indention has been added to the with logo spoilers to provide a flush appearance), in all factory colors and unpainted. To simplify the installation process, order your Mustang with the Spoiler DELETE option. If you have the factory spoiler you can order CDC’s optional stock spoiler hole delete kit. The Nifty Hole Filler Set eliminates the need to repaint the trunk while giving additional appeal to the Ducktail Spoiler. CDC designed the Ducktail spoiler without the CHMSL to meet their true vintage design goals. 110030 w/o Pony Emblem - 111031 w/Pony
Torch Red Ducktail  111038 - W/Pony - Sonic Blue Ducktail  111032 - W/Pony - Redfire Ducktail  111033 - W/Pony Black Ducktail  111034 - W/Pony White Ducktail  111035 - W/Pony Gray Ducktail  111036 - W/Pony Silver Ducktail  111037 - W/Pony
Yellow Ducktail  111039 - W/Pony Legend Lime Ducktail  111040 - W/Pony Windveil Blue Ducktail

w/o Pony
w/Pony $310.00

Colors
w/Pony
$415.00

Ducktail Hole Delete Kit Option If you have the factory spoiler you can order CDC’s optional stock Duck tail spoiler hole delete kit. The Nifty Hole Filler Set eliminates the need to repaint the trunk while giving additional appeal to the Duck tail Spoiler. 112030

$93.00

Original Ford Factory Take-Off spoilers, these take off spoilers are gently used, may require some paint work. 0511-2300-10 - Black - 0511-2300-20 - Performance White 0511-2300-30 - Satin Silver 0511-2300-32 - Tungsten Grey 0511-2300-40 - Torch Red 0511-2300-41 - Redfire 0511-2300-51 - Windveil Blue 0511-2300-52 - Vista Blue 0511-2300-60 - Screaming Yellow 0511-2300-80 - Legend Lime 

$167.00

Mustang Ram Air Shaker Scoop System 05-08 (Click Here for all Shaker Systems)

Official Foose Design and Engineered Hood. For the 05-08 Mustang and styled after the ‘69 Mustang and featured on the Limited Edition Foose Stallion. Available with a stamped and flanged opening exclusively for the CDC Shaker, - no cutting or trim ring required. Both the inner and outer panels are stamped aluminum and provide OE quality fit and finish– highest quality aftermarket hood available. The Foose designed Hood utilizes the factory washer nozzle locations. 0511-7010-01 - With Flanged Hole Shaker Hole.

$1040.00

Official Foose Design and Engineered Hood. For the 05-08 Mustang and styled after the ‘69 Mustang and featured on the Limited Edition Foose Stallion. Both the inner and outer panels are stamped aluminum and provide OE quality fit and finish– highest quality aftermarket hood available. The Foose designed Hood utilizes the factory washer nozzle locations. 0511-7009-01 - Without Flanged Hole Foose Design Mustang Hood 

$1040.00

B9 Hood Scoop is a universal design resulting in universal fitment. CDC has currently test fit the scoop on 04-05 F-150’s, 05-08 Mustang and F250/F350 Super Duty, with numerous other applications waiting to be discovered. B9 Product dimensions 20.75” wide across front tips 21.5” wide across center 19.25” wide at rear 27” back to front, to the longest points of the left/right tips at front 3.25” tall at center front 1.5” tall at rear, just as scoop tapers down to hood. 110056

$263.00

Designed and Manufactured by CDC. The Smooth 05-06 Mustang C-Pillar Scoop attaches using ¼” wide x 1.125mm thick 3M Acrylic Foam bonding tape and requires NO drilling. This high OE quality part compliments the high quality style of your Mustang. 110041

$198.00

2005-08 Mustang interior rear quarter window close outs, Charcoal headliner matched closeouts that enhance the interior appearance of the vehicles equipped with CDC smooth C-Pillar Scoops. 112040

$30.00

Designed and Manufactured by CDC. The Louvered C-Pillar Scoop attaches using ¼” wide x 1.125mm thick 3M Acrylic Foam bonding tape that requires NO drilling. This high OE quality part compliments the high quality style of your 2005-06 Mustang. 110042

$198.00

2005-08 Mustang Coupe Ducktail Spoiler 3rd Brake Light Option CDC designed the Ducktail spoiler without the CHMSL to meet their true vintage design goals, but CDC understands that some customers wish to have the optional 3rd brake light so they created a system that does not intrude on the design efforts of the spoiler. This optional 3rd light mounts inside rear window. This 15.6” LED light adds a high mount high tech look when brake is applied and is otherwise invisible. 110620 Coupe - 110621 - Convertible

$45.00
Coupe

$68.00
Conver

Tri-Bar Center Caps Factory 2005-6 V6 Mustang Tri Bar Center Cap Set 105440

$100.00

05-08 Mustang Gauge Pod  Designed and Engineered by CDC. This high temp ABS product (which will NOT distort in heat) is molded in black with a paintable smooth finish. Attachment process with acrylic bonding tape or dual lock velcro - No Drilling Required- Gauges sold separately. Any 2 1/16 - inch gauge will fit the Classic Cluster. Please note the gauge pod will not work on a 2007 with the interior upgrade package (vinyl wrap dash)  110140   (SEE Gauges)

$100.00

05-08 Mustang V8 Eibach Pro Kit Lowering Springs are the perfect answer for most frequently driven streetcars. Its Eibachs legendary Progressive Lowering spring system that dramatically improves both a vehicles performance and appearance. The Eibach Pro Kit lowers your cars center of gravity, reducing squat during acceleration, body roll in corners and excessive nose-dive under braking. When combined with Plus-1 or Plus-2 wheels and tires, the Eibach Pro Kit is the finishing touch to a winning recipe for performance. Eibach Pro Kit Lowering Springs also reduces excessive fender-well clearance, making your car look just as hot as it performs. Every Eibach Pro Kit is designed and tested by Eibach suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling, without ever compromising safety or ride quality. By using Eibachs proprietary, progressive spring Kit design, Pro Kit provides the ultimate balance to take your passion for driving to a whole new level. 
110700 - 05-08 Mustang V6 Eibach Springs - 110702 05-08 Mustang V8 Eibach Springs

$278.00

05-08 Mustang Dynamite Stick Sequential Taillights CDC has engineered an ALL NEW Sequential System for the 2005-8 Mustang...the Dynamite Sticks Sequential System. This dynamite design requires no core, no splicing and no harness; the results high tech lighting to your rear end with simplified installation. This advanced engineered system uses Ford OEM connectors with a preprogrammed microprocessor that controls timing for optimum performance. Standard with reverse circuit protection with voltage regulation, also CDC’s sequential system has physically sealed the package that protects electronics from moisture that will enter your trunk. When the brake is applied the lights will sequence once and then stay solid. 110631

$156.00

Classic Directional Mirrors are available for 05-08 Mustangs When the turn signals are on, a red signal sign appears in the side view mirrors. High intensity LED's used (light emitting diodes) illuminate 180MS faster than conventional incandescent lamps. Application- snaps in and replaces factory mirror only (factory mirror housing is not replaced). Installation time is approximately 2 hours. 110909

$230.00